|
4 Bank Battery Setup
Molar Boater in answer to your question I just stay in switch #1 I have a 19 Bay with #1 (crank/accessories bank) mounted in the back on the port side in the back on the starboard side I have a Optima d 31 group yellow top these two are connected to the Perco switch.
Up front I have two other D31 Yellow Top Optima’s. I have a stand alone the three yellow tops for pushing my 101 3X Rip Tide Bow mount. I use the Stealth DC charger on this and all previous boats. Always charging the craning battery and when it’s topped off the trolling batteries are then charged. I also have installed an extra Manico outlet on the bow next to the one for my trolling motor that I connect to my truck with a harness to charge and fully top off my 4 battery bank system will I am towing. With this setup I can stay on the water indefinitely as far as electrical output needs are concerned. Some times while doing the night client trips I will switch over to both banks on the switch since I run several lights off my Stern yellow top. I hope this answers your question if not you know how to find me. LOL
|