|
Tygh,
I had the same problem. If your pick up has the screen screwed on it take it off. You will not be using it. Go to a hardware store. Get a plastic elbow (female) with the same threads as the pick up tube coming out of the stern. It's not PVC, but a thicker plastic almost white. then get in the gray plastic pipe area and get a 2 inch threaded section and a 1 inch threaded piece. get a gray plastic elbow with a barbed end on it that accepts hose. Go home and put it together. Play with it until when it is turned down it is at the bottom of your boat with the pick up facing forward. Shave the pick up hole to an angle so it skims the water and picks up at high speed. It is so simple and cost about three dollars. It may be hard to imagine what it looks like. I will try to get some pictures and post them tomorrow. Then you'll get it. The white screw on elbow turns your pick up down;then the 1 or 2 inch threaded pice lenghtens it to bring it to the bottom of your boat. The gray elbow then turns your pick up forward. It should skim the water like your transducer .
John D.
|