[PAX]

Hi guys,

I had a surprise this afternoon when I crawled under my boat to check some wires. It was the first time in the two years I have the boat that I checked the bottom. Long story short it appears that some holes were drilled in my hull and then patched. I know it sounds wired but I am not kidding. They are the size of a 5/16 or 11/32 drill bit. So before I bring the boat to the dealer where I bought it new to ask for some explanations I just want to make sure that this is not the result of the manufacturing process. One of the hole seems to have been patched with Rule. It is soft and flexible when pushed with a finger. I noticed that one because water was dripping from it. There appears to be several others, all pretty close to the centerline. I will try to take so pics in case that can help. Any ideas what is going on?

Thanks,