|
I had the same problem a couple of months ago. I went to Auto Zone and bought a can of Liquid wrench-don't remember which one, but it was foamy. Let it sit for about 15 minutes. Then using a hammer and a piece of wood(to prevent damaging) I went to town. Once you break it free twist the engine back and forth, the whole time wipe and respray the arm. I did this quite a few times. The last time I took the boat in for yearly maintenance I had them take it apart and clean it good. Now when I get back from fishing and done cleaning the boat, I'll shoot some wd-40 in there just too make sure it doesn't happen again, I hope.
|