|
Wish I had a pic but for a Suzuki df140, there is an aluminum steerer bracket bolted to the face of the motor transom mounting bracket, hence, when you steer, the motor pivots and turns.
The cable enters the starboard end of the tube and bolts to a ss rod inside and the rod exits the port side then to a pivot bolt and another short rod to the motor. Disconnect the pivot bolt and the 4 screws holding the steering tube onto the motor and it is all "free" to be pulled apart.
Your's definitely could be different since there's no mistaking the aluminum steerer tube bolted to the motor where the cable runs into it.
Good Luck, I'll take a pic soon and add it to this thread.
Molar
|