|
OspreyViv, The pictures is not a problem. Getting them on a post could be.
What do you need pictures of? The new foot rest is the only thing that is new. The post that the seats are mounted on you already have.
I removed the post from the top of the bait well and removed 3 1/2" from them. I used roto tool with a cut-off wheel to cut them off. I messured the slot that is in the seat post that is for the seat swivel pull knob. 1 1/4" and 2 1/4" down from the top of the post and 5/16" wide. I used a 5/16" drill bit to drill most of the slot out. I used a rat tail and a flat file to dress out the slots. Just make sure that you make the slots in the same place that the where.
Most of the seat swivel pull knobs are rusted and won't move so this step may not be needed anyway.
But like I said I will take pictures and I will try to post them. All I have to do is learn how to do it.
After reading the mods that you did on your boat I am sure that you won't have any problems making this mod.
Good Luck, Bob
|