|
Yes I just replaced mine. The left one shorted out due to the wires being smashed between the light housing and the mounting plate cutting the wires. This caused the fuses to blow in my truck. Found the shorted light and unplugged it. Installed new fuses and checked the right break/turn light. It would only flicker and I could see that it was full of water. Before I could unplug the lights it blow the fuses again.
When I unplugged both lights the male prong on the plugs where corroded bad and the prongs broke off and stayed in the other half of the plugs.
I was told that EZLoader had a problem also and got two new lights. I made sure that the wires where not pinched and I also sealed everything that I could when I installed them. I also took liquid tape and sealed between the plug halfs. Hope that this set last longer. I got 10 months out of the first set.
|