How can you say you got no results? I took pictures of the back of my electronics right after your post and uploaded those for you. As mentioned elsewhere, my boat is covered up right now and we've had freezing temps the past week so pulling it out to take photos is not real convenient at the moment. I also have some tough deadlines with work. I'll try to take some more photos when the weather warms and there is time to do so.
The radar, GPS, Sirrus Satellite cables are fed thru the T-Top aluminum into the inside of the console. I cut an access hole in the right corner at the rear of my console storage (with the fold up see-thru access door) to feed all the cables for my electronics insert thru. I kept my CD/Radio mounted permanently in the back of the console. The cables for electronics are bundled and when the electronics are not installed I just feed some of the bundle back down the access. The transducer feed is routed off the port side of the transom as seen below, and is fed into the motor cable bundle and under the floor, thru the cableway and up under the console. I hope this helps.
Quote:
Originally Posted by Rhinofish
I am going to rig my electronics this weekend. Posted for some info and got no results...
|