|
This is not a easy question to answer. Cracks around the scuppers should be handled by your dealer, since you will need a plastic welder. It's not rocket science , but it takes some practice. Small stuff can be repaired with something as simple as on old style soldering iron. after the weld is complete sand the area with 240 and go to 800 grit paper. When it's smooth, buff the area with a dry lambs wool buffing pad. the heat generated by the pad will being back the gloss.
Were trying to put together a welding kit that will include a welder, plastic welding rod and plastic powder at a reasonable cost, however you will still need a compressor since the welder needs about 2 lbs of constant air. I'll keep you posted.
Dick
|