|
i have the 12" lencos on my 210 and i chose to not go all the way out to the last chine but dead center on the 2nd from outside. by doing this ,i was able to mount the top of the actuator on the same surface as the bottom rather than on the raised part of the transom. boat responds as good as i could hope with the exception of more turbulent water near the transducer than if they were spaced further out to the edge
berto
__________________
former owner of '01 logic 210cc with 140 johnson 4s
former owner of '01 logic 186 cool bay w/115 yami 4s
yellow over white Hurricane Phoenix 160 kayak
|