|
don't know what year model you have ,but in '01 factory did not install a solid bottom holder but rather ones that had a drain hole out the bottom and taped close. if the tape fails the foam will get wet and add water to the inner hull foam. i once owned an 01 186 bay and cant remember where the holders are positioned on the gunnel, but on my current 01 210cc i was able to pull the holders out ,add a barbed male adapter to the bottom hole and add enough tubing to reach down to where the rod storage holes were in the gunnel and exited the tubing there so all water now runs out on the deck. i'll check the gallery and see if i can see a pic of that area and suggest an option for ya.
robert
__________________
former owner of '01 logic 210cc with 140 johnson 4s
former owner of '01 logic 186 cool bay w/115 yami 4s
yellow over white Hurricane Phoenix 160 kayak
|