|
Piledriver
The Temp These Boats Cook At Would Not Allow Anything Other Than Brass To Be Used And I Think That Will Be Cost Prohibitive . But You Are On The Right Track That The Molds Need To Be Designed/modified So That No Water In Between The I/o Hulls Can Be Trapped And Not Drain To The Transom For Removal As Was The Case In Some Early Models
__________________
former owner of '01 logic 210cc with 140 johnson 4s
former owner of '01 logic 186 cool bay w/115 yami 4s
yellow over white Hurricane Phoenix 160 kayak
|