Quote:
Originally Posted by elroy
on my 170cc I ran my tranducer wire through the rubber boot so I didn't have to drill a hole and it works fine. Just a thought. Also I installed a 4 circuit pannel for my eletronics.
|
Same installation on my 170CC. Run the 'ducer wire from the CC, through the tubing provided and out the rubber boot at the rear and down the transom. No holes to drill. I also installed a fuzed circuit pannel for electronics under the CC. I wired it to the battery switch so when I cut the power, everything goes. No drain on the battery.
I hope this helps.