|
The boat is an 05 210cc. I have read the posts on installing the drain.I thought there would be more water because of the amount coming out through the glob of rule down the center line in the bildge. Bildge pump on one side drain plug on the other.The water that is geting in could be coming from the crack in the anchor locker,rod holders that had to be flushed twice because gas was put in them,and all screws. I think there is a little water on top of the foam in the inner hull. Also do i use a screw driver to dig out the foam it is really hard.
Thank you to all who help.
Going tuna fishing out of morro bay CA. this week
|