|
i just replaced my drums with a disc system and there was a backup solenoid installed in the new actuator that couples to the truck. did they just do brakes only?? if yes then you may be able to use the manual lockout pin that should be on the current actuator----only way to know is back it up in a sandy place and see if the brakes lock up while backing
BTW the solenoid requires an extra 5th wire wiring harness or a manual wire jumped back to the tow vehicle
__________________
former owner of '01 logic 210cc with 140 johnson 4s
former owner of '01 logic 186 cool bay w/115 yami 4s
yellow over white Hurricane Phoenix 160 kayak
|