|
I Will Keep Bringing Up The Thermos Bottle Or Chocolate Easter Bunny Analogy So Everyone Will Understand The Concept Of How These Boats Are Made. Instead Of Air Inside The Two ,foam Is Injected There. Any Hole Drilled In The Thermos That Is Not Sealed Will Allow Water To Enter . Just The Flexible Nature Of The Plastic Requires Ample Sealant To Fill Any Hole ,screw , Accessory To Keep The Water Out Of The Foam Area.
The Drains Are There To Give Us A Means Of Removing Any Water That Finds Its Way In The Foam Which Is Open Cell And Water Is Supposed To Drain Through It.
I Will Happily Open A Simple Drain Plug In The Rear Of My Boat And Drain This Water As A Trade Off For Being Able To Sit In My Captain's Chair And Never Have To Stand Up To Ward Off The Shock Of My Boat Pounding My Body To Pieces Or Getting Drenched To The Bones As In My Former 23ft Glass Center Console
__________________
former owner of '01 logic 210cc with 140 johnson 4s
former owner of '01 logic 186 cool bay w/115 yami 4s
yellow over white Hurricane Phoenix 160 kayak
|