|
Wow, thanks. I assumed all of my inner hull water would come out my inner transom drain once I get all of the hull breaches fixed.
What are spin weld plugs?
So you drilled holes aft of the tank or just in front of it close to the mega hull wall on both side and sucked water out?
On the the new Aluminum Transom Saver I had a well known welder prop shop in Dallas go over with me what I want and he used 1/4 inch and built it. I went from 2 good thru bolts to 8 good thru bolts in the saver. It cost quite a bit a took a good bit of time but its solid now.
As far as the fish boxes go I plan to use garboard plug, RULE and nuts and bolts as apposed to screws to mount them with.
I will check my gas cap as well.
Thanks,
|