|
Bob,
I am winterizing this week so will do some more detailed checking and post. I do not have water in any quantity coming from the blob area, just rust stains. It may be from bilge water only, don't kinow. That is why I asked the question. Bad description on my part.
I was most interested in the void area you found and why it is even there. Seems it should have been filled when the boat was foam filled. Just very interested in that void and the possibility of more water retention.
Could you elaborate on the plugs you used to close the clean out holes you drilled (spin welds)? What is the diameter of the hole you use for vacumming? I feel confident in the install, just not sure where you can get the plugs. I assume they are similar to the plugs used by the factory to close the foam injection holes. Is that correct?
Inquiring minds want to know!!!
Thanks for the info, Dave
|