[OspreyVic]

Well I just started this project today. We purchased two Beckson Pry-Out Deck Plates, color: White, Texture: Smooth, Size: 6”, Mfr # DP61W.

We removed the eight screws that attach the deck covers to the boat and both sides were straining against the screws to come up.

After we removed the foam objects that were in each cavity, we held our nose and measured the water depth. Starboard side had water almost 5 inches deep and the port side was over 7 inches deep.

We have cleaned the covers and now get to clean the voids.

While this is not my idea of fun, this is my pride and joy, so I will do the best job I can.