|
Sorry the delay,
but to answer your question, nope! I started to and after pulling the instrument panel I realized that when they installed the new motor they didnt replace the wiring harness, so it wasnt going to be a quick and easy plug up like I though. however, with that said, it will be installed within the next month or so as I am taking it in for the 200 hour service. Will let you know how it comes out then.
My current issue, is an old one as water is in the inner hull. the source was in the bilge at the metal support. Hence I have drilled two transom plugs (one for each side and have the bow lifted as high in the air as I can get it. just waiting for the dripping to stop!
|