[BeeReel]

Lucky,
I had also considered something like what you described but didn't post that option. However for mounting plates that are factory-installated by Triumph as "Taco Ready" this seems like a little more work than expected.

If I really have to do that level of work and cutting, another option (if lucky) would be 1) to cut small holes the sixe of the bolts in the lower plate and 2) to insert spacers between the plates through which the bolts passed, and 3) run longer bolts through the upper plate:spacer:lower plate and attach nuts on bottom. I should be able to keep aligned the 4 spacers while installing the Taco mount?


This method of installation would surely give the strongest mount.

PRBUZZ