View Single Post
  #15 (permalink)  
Old 05-19-2008, 06:06 PM
boostjunkie1's Avatar
boostjunkie1 boostjunkie1 is offline
Captains Club Member
190 Bay Owner
 
Join Date: Apr 2008
Location: NC
Posts: 106
Thanks: 23
Thanked 22 Times in 16 Posts
Ok, so here are the results that I have found- - - - - There are no leaks in the boat at all that I can see. This was verified by filling the livewell up and making it overfill. I saw that the drain is T'd into the bottom drain in the well. All of the water went out the back drain hole for the livewell. I then filled the bilge with water and got under the boat to make sure that there was no water leaking out from any of the plugs and intake holes for livewell pump ect....NOTHING???? I called the Dealer and he stated that I need to place the boat in the water and turn on the livewell pump and make sure that it is not cracked anywhere. This would make sense since the first couple times that I had the boat out I did not see any water in the hull at all. I did not pump any water in with the livewell pump on these occasions. Thanks for all the help and advise that everyone gave. I have a plug that fits into the bilge pump out hole that I will also place in to make sure that there is no back flow from that while I test the Baitwell pump..... JB
__________________
2007 190 Bay with, T-Top w/curtians, T-Bag, VHF, Furuno Color Graph and GPS, Minnkota Auto Pilot TM w/onboard batt charger, 2 Ped Seats, Swim Platform, 150 h.p. Yamaha 4 Stroke.....LOADED --->1500 Ram, HEMI, 4X4, White SB, Loaded!
Reply With Quote