|
Splash well bottom plate mount holes.
Hello everyone. I’m replacing the void filler plugs with new plugs I got from Triumph along with a tube of Rule sealant. The holes they drilled are not properly aligned and some don’t even grab enough roplene to tighten down the panel. What I want to do is fill the holes with a roplene welding rod I got from the Triumph dealer here. I’ll realign and drill pilot holes. Does anyone know the air temp I should be setting on my welder. I sure appreciate any advice for or against my plan. Thanks in advance.
Ken A.
210CC - Sea-Vu-Play
|