|
i forgot to tell you on the prev. post that the black access covers in photos are inside the foward storage boxes. these were not too hard to get the foam dug out of .the starboard side didn't have any foam in that area at all. i elected not to thru bolt the rear legs at this time. you will have to put access plate in rear storage boxes and i keep my fish in those and will pass for now. if i see the screws begin to want to back out of the floor ,i may be forced to thru bolt at that time. i went 6 months using the boat in rough conditions and pulling 70mph on interstate without any thru bolting. testiment to modlin's design .
some guys have had the rear legs built to screw right at the strp down and they put a small access plate in the step to get to the nuts. i preferred to have the legs on the lower deck and come back to the end of the console .
lastly , if you intend to keep the grabrail around the windshield, forget about an electronics box. the light bar on the rail will not clear the e-box when the console is tilted open. i made that $300 mistake and ended removing the grabrail which i hated to do.
robert
robert
__________________
former owner of '01 logic 210cc with 140 johnson 4s
former owner of '01 logic 186 cool bay w/115 yami 4s
yellow over white Hurricane Phoenix 160 kayak
|