[ILLOGICAL GGC]

this topic has been talked about for months ,but i thought i would make a post for the logic boats because our older boats never had this done when they were new.
the drain is made by measuring 2-1/2" to the right of the centerline and 1-1/2" up from the bottom of the keel. use a 1"flat spade style bit if you choose to install the sea-dog brand plastic drain plugs that the factory uses.
this is the style merritt used on my boat as it was installed prior to my purchasing my boat. i will probably replace this seadog style with a brass garbord style later.
those owners that have installed other styles, pls add pics and install info
Robert

added 2nd picture 1-22-06 showing a brass drain in lieu of the plastic furnished by dealer.