View Single Post
  #3 (permalink)  
Old 11-10-2004, 03:27 PM
Dick@merrittmarine's Avatar
Dick@merrittmarine Dick@merrittmarine is offline
Captain's Club Member
Triumph Dealer
190 Bay Owner
 
Join Date: Nov 2004
Location: NC
Posts: 252
Thanks: 0
Thanked 11 Times in 9 Posts
Quote:
Originally Posted by MolarBoater
Re-thinking the situation, I might take the boat/trailer to a truckstop with scales and see how much it weighs. Thinking anything under 3,300 lbs might be acceptable with the four stroke and full tank of gas and 5 batteries. At last use, the boat didn't sit any deeper in the water than usual but if the lower hull foam is saturated, it might not sit any deeper anyway....it all water right?
Anyone else been thru this? Will truck stops let me weigh the boat? How much do they charge on average?
Thanks for any advice, I hope the weight is fine and I can just reseal the spot. Anybody from Triumph or Merritt Marine out there with suggestions?
Thanks, Emery
Quote:
Emery, What year is your boat? 33-3500lbs is in the range, A crack is easily welded, give me a call and i'll talk you through the repair.
Dick
Reply With Quote