|
I have a 170 Bass and have added an onboard charger, bow sonar, a new rear sonar with a speed sensor, and dual trolling batteries. I pulled all the wiring using an electrical fish tape I bought at Home Depot for use around the house. My boat has the wiring tubes but the original wiring is a rats nest. I have a lot of unconnected wires in the harness that just add to the clutter, but there is no diagram, so I have not tried to get rid of them.
When I removed the original sonar unit that came with the boat it had one terminal wired to my nav light switch. It was so hard reaching up under the console to get to that switch that I just wired straight to my trolling batteries. I cut off a lot of zip ties on the harness to get the sonar in, but I put most of them back with new ties.
Triumph should be ashamed of their wiring jobs.
woodNfish
|