|
Actually Clogger that is the water issue I am currently having. Do you remember last yr at the mackfest when the factory guy welded shut a hole in my bilge floor. What had happened was the water pressure in the inner hull foam had blown out a pim hole in the floor of hte bilge and the water would flow up into my bilge and get pumped out. This winter I believe it has happend again , probably due to freezing. when the boat is off the water the water flows to the bilge untill the pressure is reduced enough that it does not exit the foam area any more. but when I put it back on the water after about 2 hours the pressure builds up again my my bilge starts pumping water about every ten or fifteen minutes.
|