Triumph Boat Owners Network  
Go Back   Triumph Boat Owners Network > Triumph Boat Forums > Trailers and Towing

Trailers and Towing Tips related to towing setup, packages and vehicles


Welcome to the Triumph Boat Owners Network forums. You are currently viewing our boards as a guest which gives you limited access to our "Visitors" page and to view Classified Ads from our members. If you currently own a Triumph or Logic Boat we welcome you to register and join our Captains Club in order to participate in our forums. As a Captains Club Member you will have access to post topics, communicate privately with other members (PM), view and upload photos in our Photo Gallery, respond to polls, upload content, user our free Classified Ads and access many other special features. But you must own a Triumph or Logic Boat in order to register as a member. We are currently offering a free 1-year subscription to the Captains Club to Triumph Boat Owners. If you choose to renew your subscription the following year the renewal fee is only $15.00. Our registration system is moderated and you must enter all the information requested in order to join our Triumph Boat Owner Captains Club. If you own a Triumph or Logic Boat we invite you to join our community today! You can learn more about the Captains Club here. If you have any problems with the registration process or your account login, please contact us.
Visit Our Sponsor
Triumph 2007 Banner
Interested in advertising with us?  

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 02-25-2007, 08:33 PM
New Member
 
Join Date: May 2006
Posts: 13
Thanks: 0
Thanked 1 Time in 1 Post
Question Trailer 'Guide Ons'

Been thinking about adding trailer guide ons to get the boat centered easier when the wind and tide are pulling. Saw some pics of what looked like home made ones of PVC. Is it best use the roller type or the stationary post ones on a Triumph boat? Buy or make? Appreciate any comments -

Mobyduck
Reply With Quote
  #2 (permalink)  
Old 02-26-2007, 05:06 AM
Tallmantwo's Avatar
Captains Club Member
210 CC Owner
 
Join Date: Jul 2006
Location: NC
Posts: 24
Thanks: 6
Thanked 0 Times in 0 Posts
Good Morning Mobuduck, I just installed some on my trailer, I have a 210. Bought mine from bass pro, they look like pvc but that is slid down over a metal rail. they also have lights on top. around a 100 bucks. I like mine, put reflective tape on top of the pole. Man do they reflect the light at night, can easly see the trailer when backed in the water. Tallmantwo
Reply With Quote
  #3 (permalink)  
Old 02-27-2007, 03:23 PM
New Member
 
Join Date: Jan 2007
Posts: 12
Thanks: 0
Thanked 1 Time in 1 Post
Mobyduck,

I made my side guide-on's, for around ten bucks. Two inch pvc, caps, galvinizied screws, and reflective tape. Sounds home made but they look as good if not better than the ones offered in the marine stores, and the pvc is I purchased is heavier duty.

I have a bass boat that had carpeted bunks and carpeted guides. Carpet can be a pain launching a boat in shallow water, if you don't spray silicone on the carpet. Then you have to watch out on a steep ramp, the boat may take off, if your partner unhooks the winch strap to soon (almost happened to me once)!

I found a set of pvc covers in white, which matched my boat color, at a local marine store.I'll get the manufaucture name if any one is interested, these are great. They fit over the new treated two by four bunks, that I installed. This enables the boat to glide on and off easier in shallow water, and doesn't wear like the carpet.

After installing the pvc bunk covers, I removed the carpeted side guide-on's, modified the hardware so I could install two inch pvc pipe, over the brackets that held the guide-on's. I placed a cap that can be purchased for the pvc, and reflective tape. This works great, and matches the bunk covers very nicely.

This set-up doesn't marr the finish on my boat, and has been on my trailer two seasons with no problems. Best of all my trailer which is galvinizied is now completely maintance free.

Susky Kid
Reply With Quote
  #4 (permalink)  
Old 02-28-2007, 08:23 AM
peterturf1's Avatar
Captains Club Member
210 CC Owner
 
Join Date: Jul 2005
Location: CT
Posts: 19
Thanks: 0
Thanked 4 Times in 4 Posts
I installed the non lighted pair from cableas makes recovery in strong tide or wind much less stressful.
Reply With Quote
  #5 (permalink)  
Old 02-28-2007, 12:29 PM
Genelie's Avatar
Captains Club Member
210 CC Owner
 
Join Date: Mar 2005
Location: CA
Posts: 914
Thanks: 42
Thanked 40 Times in 34 Posts
My 2 cents, on my old boat I had them, when I first got this boat, I was a fubbler trying to get on the trailer in all the wind and tides....but with time, I can hit the mark everytime now....practice makes perfect.
__________________
Can't soar in the morning with the Eagles; if you Hoot all night with the Owles.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Trailer bucking - thread from old site OspreyVic Trailers and Towing 7 06-02-2008 07:24 PM
Trailer troubles JollySickTime Trailers and Towing 8 12-30-2007 06:40 PM
2004 Easyloader trailer needing trailer brakes. bob_bra Trailers and Towing 2 01-09-2007 01:11 PM
Help on Trailer Recall/Mod Stu Trailers and Towing 15 02-27-2006 02:07 PM
Trailer spare tire mount Davekfl Triumph 170 2 05-05-2005 04:47 PM



All times are GMT -5. The time now is 12:44 AM.
© 2004-2008, North Carolina Angler, Inc.
Note: Triumphowners.net is not affiliated with Triumph Boats or their dealers.
Content Relevant URLs by vBSEO 3.2.0 RC5