t top info

[C Firth]

Need some help, receintly purchased the 01 logic 210 refered to in a earlier message... getting ready to have a custom t top installed around the last of May...I know that the ttop must be through bolted but the fabricator is not to familuar with the logic/triumph...could anyone e mail me some photos of how and where theirs it attached ...in viewing the photos ...lots of pics of ttops but not how they are being attached.....ANY help will be appreciated..

thanks,everyone has always been very helpfull in the past
CFirth

[Mike in Woodlands]

You might contact "tops and towers" in Houston/Nassau Bay Texas.

they have done "several" tops for Logics for the dealer we used to have in the houston area. maybe they will communicate with you or your preferred fabricator.

I know if I ever change from my bimini to a Tee Top they will do mine!

[ILLOGICAL GGC]

cfirth
check out the top made for my '01 210cc by modlins of farmville nc. i have pictures in the 210 photo section. they even put a lookout on top so i can sight cast for cobia out of oregon inlet. i will be adding some more pics tonight once my daughter calls me back and tells me how to get them from the floppy in the camera to the site. this top is the bomb!! extra strong and they can modify it to your needs. a fair price for a darn good top. their site is linked on our home page at the bottom left side. merritt has a used factory and a new one , but you couldn't give me a factory top. sorry dick ,but the factory top sucks.
robert .

[C Firth]

il-logic-al GGC
My Fabricator checked the web site,,and comented on your top,he thought it looked good....and that is a darn good compliment from a guy that does it for his business...I think we have a good plan for my top,the only tuff part is through bolting the top to the floor,,he is not exactly sure what he will find when he starts drilling,(first plastic boat he has delt with) I will check out your new photos...thanks again

CFirth

[ILLOGICAL GGC]

plan to download tonight after reading the forums and b-4 bed in 210cc mod. photo section
GGc

[ILLOGICAL GGC]

i forgot to tell you on the prev. post that the black access covers in photos are inside the foward storage boxes. these were not too hard to get the foam dug out of .the starboard side didn't have any foam in that area at all. i elected not to thru bolt the rear legs at this time. you will have to put access plate in rear storage boxes and i keep my fish in those and will pass for now. if i see the screws begin to want to back out of the floor ,i may be forced to thru bolt at that time. i went 6 months using the boat in rough conditions and pulling 70mph on interstate without any thru bolting. testiment to modlin's design .
some guys have had the rear legs built to screw right at the strp down and they put a small access plate in the step to get to the nuts. i preferred to have the legs on the lower deck and come back to the end of the console .
lastly , if you intend to keep the grabrail around the windshield, forget about an electronics box. the light bar on the rail will not clear the e-box when the console is tilted open. i made that $300 mistake and ended removing the grabrail which i hated to do.
robert
robert

[C Firth]

Thks for the photos, I have printed them and will give them to the fabricator...Im sure it will be lot of help..hopefully the top will be installed in 2 weeks or so,I will let you know how it works out...one other thing ,do all the through bolts need to be sealed with rule?

______________________
owner 01 logic 210cc 150john 4 stroke
still own a 27 searay thats for sale

[ILLOGICAL GGC]

i would put the top in place ,drill the floor holes and rule the floor flange and rule across the holes so the bolts get a coating of rule---rule is our friend!!!!!!

[Genelie]

I know i am late for this reply, did you ever get pictures you need, I have a after market t-top, from Pacifica Yaught towers, they did great work, I can send pictures if you need.

[C Firth]

yes,I got the info from IL-Logic GGC,the photos came out great, I take my boat to the fabricator on Sat,he said he will have it about a week to install the top,I am looking foward to it...later on I need to get some curtains installed (when I get some more money) I enjoy winter fishing for rock fish.
I will probably be looking for ideas on the curtains in a month or so,I am more concerned about the side curtains than anything,making sure I have fishing clearance and not blocking the fish box..

thanks again for the reply
CFirth
-----------------
owner 01 logic 210 cc 150 johnson