megga drain help

[ksr5]

Ok im confused i have an 02 210 is this considered an early model? Also i looked at my mega storage drain it looks like it goes in about 7 to 8 inches and opens up what should be there a pipe? is the drain molded in to the boat?
or is there a hose attached to it? does it go back to the bilge? if i put the pipe in you guys talked about how long should i make it. help

thanks ksr5

[ILLOGICAL GGC]

if you have an 85 gallon gas tank you are considered an early model. if your live well drains onto the deck rather than from a hole in the bottom of the well you are an early boat.
the mega drains directly into the bilge but the tube which is about 6-7 inches long is molded in place . i cut a piece of plastic pipe 18 inches long and tapped it into the tube as far as it would go,marked it flush with the side wall of the mega. i then pulled the pipe out ,cut it at the mark,put a good coat around the last 2 inches from the end closest to mega and tapped into place until flush , and then finished the rule around the opening, this fix is detailed in the logic section
robert
.