![]() |
|
|||||||
| Home | Visitors | Forums | Photos | Articles | Classifieds | Reviews | Search | Today's Posts | Mark Forums Read | Register | Info |
| Triumph Tech Talk Dick Cabble of Merritt Marine tackles tech and warranty questions |
| Welcome to the Triumph Boat Owners Network forums. You are currently viewing our boards as a guest which gives you limited access to our "Visitors" page and to view Classified Ads from our members. If you currently own a Triumph or Logic Boat we welcome you to register and join our Captains Club in order to participate in our forums. As a Captains Club Member you will have access to post topics, communicate privately with other members (PM), view and upload photos in our Photo Gallery, respond to polls, upload content, user our free Classified Ads and access many other special features. But you must own a Triumph or Logic Boat in order to register as a member. We are currently offering a free 1-year subscription to the Captains Club to Triumph Boat Owners. If you choose to renew your subscription the following year the renewal fee is only $15.00. Our registration system is moderated and you must enter all the information requested in order to join our Triumph Boat Owner Captains Club. If you own a Triumph or Logic Boat we invite you to join our community today! You can learn more about the Captains Club here. If you have any problems with the registration process or your account login, please contact us. |
| Visit Our Sponsor | |
![]() |
|
| Interested in advertising with us? | |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
To my knowledge there isn't any other maintenance per se other than keeping it clean.
I check for tightness on screws on the wiring harness now and then and I'd strongly suggest you get some good marine grade anti corrosion spray lube and also a small grease gun with blue marine grade grease and locate the lube points on the engine and control cables, give them a shot once or twice a season, also get up inder the console and check the tightness of all your screw down electrical connections and then give them a good spritz of the spray lube. I had some loose connections right out of the factory on a new boat that started to come loose after a couple of trips, (Stuff happens, just tighten them up again) no biggie. Also check the snugness of the grab rail bolts and the side rail screws. Don't over tighten them as thay can strip but they should be snug. Probably take you 30 minutes to do unless you stop for a beer or two then you might be at it all afternoon Something else you might do is pull your prop and make sure the shaft is well greased and there is no fishing line built up under there which is bad for the lower unit seals, remember to torque the prop nut back (I think it's 29 ft pounds) check you manuel for the proper specs |
|
||||
|
Hey Dave, this is my take on the water pumps (impellers), It depends a little on whether you are in salt or freshwater, but my recommendation is once a year or every 250 hours, which ever comes first. This is based on my experiences with saltwater use. I paid the price last year by skipping season. So come July 06 while heading offshore the impeller broke apart and the overheat warning failed. Hence, 15K later I have a new Honda 150. You can bet that I will never skip a season again! |
|
||||
|
Quote:
As for the motor, its warranty is of course different, so just follow the owners manual. Happy boating PileDriver |
|
||||
|
Scheduled Maintenance
Piledriver,
Great, that's the answer I was hoping for, I live about 90 miles from my dealer, and it's a long trip. I Can get the Yamaha serviced about 20 miles from home, thanks for the info. Mark |